Sovol SV08 3D Printer Speed up 700Mm/S High Speed, Klipper with 64-Bit, 300℃ All Metal Hotend, One-Key to Auto Leveling, Integrated Nozzle, Silent Motor Drive, Larger Printing Size 13.78X13.78X13.6 In

Sovol SV08 3D Printer Speed up 700Mm/S High Speed, Klipper with 64-Bit, 300℃ All Metal Hotend, One-Key to Auto Leveling, Integrated Nozzle, Silent Motor Drive, Larger Printing Size 13.78X13.78X13.6 In

A$819.00
Availability:
  • In Stock
Product details
  • [Core XY 700mm/s Max Speed ] - SV08 3d printer utilizes CoreXY kinematics todecrease moving mass and enhancemotion control, consequently boosting maximum 40000mm/s² acceleration. limitationsof smaller printing volumes.
  • [13.8x13.8x13.6in Large Printing Size ] With a generous printing volume of 350x350x345mm, our 3d printer SV08 allows for the full expression of creativity, unbounded by the limitationsof smaller printing volumes.
  • [Open Source] - Sovol 3D Printer SV08 is based on Voron 2.4. From the beginning of research and development, we decided to make SV08 open-source. Besides, open-Sourced OrcaSlicer offers arc fitting, variable line width, and spiral ascent. It also includes intelligent cooling, overhang speed reduction, and segmented retraction. The software optimizes nozzle paths for faster printing and features a user-friendly, categorized interface with clear content for easy operation. As an open-source slicer, it supports configurations for various printer brands.
  • 【Integrated Hotend-design with 300° nozzle to Reduce Leakage】Integrated hotend-design: heating block, throat and nozzle are integrated. Effectively reduce the possibility of nozzle leakage, and extend the service life of the nozzle. Hotend's maximum flow rate|is 30 mm³/s, equipped with 300° all-metal nozzle Support these filaments: PLA, TPU, PETG, ABS, ASA, PA, PC (Please note: when printing these filaments PETG, ABS, ASA, PA, PC,it need to be used a heat preservation cover or sealing kit, glue)
  • [Quad-Gantry Auto Leveling] - The entire gantry system can be smoothly leveled with 4 independent Z motors. This process, known as Quad-Gantry-Leveling (QGL), enhances printer accuracy, reducing the possibility of print failures. It can also detect and compensate for wear or damage. Say goodbye to the hassle of manual leveling, SV08 comes with pressure sensor to automatically adjust the distance between the nozzle and the buildplate, ensuring the optimal first-layer print quality right after a quick test print.
  • 【Equipped with 3 Working Modes: USB Printing, WIFI (2.4G), and Network Port 】You can copy the slicing software to a USB flash drive and connect it to SV08 for printing. You can also print using WIFI (2.4G) or wired network connection, which is very convenient
  • [Refine Details With Klipper] - SV08 3D Printer adopts the Klipper firmware to elevate printing speed and accuracy to the next-generation standards. This firmware not only enhances processing speed significantly but also enables users to minimize vibration patterns using 'input Shaping', ensuring flawless prints from one corner to the other with 'Pressure Advance', and helping reduce temperature fluctuations in the nozzle and heat bed through 'PID Tuning', etc.
  • [Ceramic Heating Block & AC Power Heated Bed] - Our high-performance Sovol SV08 3D printer heats up rapidly, reaching 300°C quickly and 220°C in 40 seconds. Using ceramic heating block & AC heated bed reduce heating time by 70%, allowing almost instant printing and easy preheating for nozzle cleaning and leveling. Enjoy precise, high-quality prints with versatile material compatibility.
  • [All-axis Linear Rails] - SV08 3D Printer utilizes linear rails for all 7 axis (4Z+2Y+1X) to improve precision and resistance to axial movement deformation.The provision of smooth and precise linear motion is crucial for producing high-quality prints. These rails guide the printer's print head and build platform, ensuring accurate positioning and consistent, smooth movement throughout the printing process.
  • [Built-in Camera & Remote Control] -3D Printer SV08 is equipped with a camera that allows monitoring of the printing process in real time. Additionally, it enables the capturing of time-lapse footage, which is the ability to closely observe and document the printing process, offering convenience and insight into the printing experience. Simply connect SV08 to your LAN using WiFi or an Ethernet port enables convenient interaction with your printers and grants access to a range of features.

Product Description

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

3d printer sv08

Merchant video
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

builted in camera

Merchant video
  • Country/Region of origin: China
  • Product dimensions: 53.34 x 55.12 x 57.4 cm; 17.69 kg
  • Material Type: Metal
  • Special Features: High spBlackeed large printer size
  • Size Name: 13.78x13.78x13.6 Inches
  • Printer Media Size Maximum: 13.78*13.78
  • Operating System: Linux
  • Brand: Sovol
  • Model Name: SV08 3D PRINTER
  • Form Factor: All-in-One
  • Manufacturer: Sovol
  • Item Model Number: SV08
  • Printer Output Type: 1
  • Batteries Included: No
  • Batteries Required: No
  • Connector Type: Wi-Fi
  • Max Printspeed Color: 700 ppm
  • Item Weight: 17.7 kg
  • Max Printspeed Monochrome: 700 ppm
  • Model: SV08
  • Printing Technology: CORE XY
  • Part Number: SOVOL SV08
  • Number of items: 1
  • Mounting Hardware: Envelopes
  • Compatible Devices: Laptop, Personal Computer, Smartphone, Tablet
  • Voltage: 240 Volts (AC)
A$819.00
Shipping to Australia Delivery time varies by location
Return & Refund Policy Check our return & refund policy
Security & Privacy Safe payments: We do not share your personal details
Availability:
  • In Stock
Sign in or create an eMega account Shop smarter — get exclusive deals & order tracking